ABOUT POLISHED FINISHES

Metals react with their surroundings, and for this reason it can seem a little daunting to clean a plaque properly. However, the solution is simpler than you think, especially when it comes to polished stainless steel plaques. All you need to maintain the surface is a microfiber cloth, and if necessary, a mild soap and warm water.  

Polished plaques have a mirror-like finish which gives them a very sleek and contemporary feel. This finish is most successful on stainless steel, as it is a very dense and high quality metal that has a beautiful shine when it has been properly buffed. However, a polished finish should only be used in specific cases. We mostly recommend this finish for interior plaques that are out of reach of the public. As with most mirror finishes, fingerprints and dust are quite visible when they interact with a polished finish surface.  

Rub the surface of the plaque with a microfiber cloth to remove fingerprints, dust and other grease stains.

The easiest solution for removing fingerprints, dust and other grease stains from stainless steel is by simply rubbing the surface of the plaque with a microfiber cloth. This material is soft enough to remove the surface grease without scratching the delicate finish. If any areas were not cleared away by the cloth, we suggest starting with water only and using a soft cloth to wipe away any remaining stains. Only if at this point a surface imperfection hasn’t gone away would we recommend using a mild soap and water solution.  

Commercial solvents should never be used on metal plaques. 

All of our metal products are finished with a clear lacquer coating that protects our plaques from oxidization. This coating can be stripped away by everyday cleaners and powerwashers, so for this reason, if the plaque needs to be cleaned, it should only be done with water and a soft brush if absolutely necessary. Commercial solvents (such as Fantastic) should NEVER be used on metal plaques. In addition, a pressure washer should NEVER be used on any metal work, especially when the surface is finished with a chemical patina or paint.

In general, please come to us first with any questions about cleaning and maintenance. We can be reached at masterworkplaques@gmail.com or (718) 283-4109.

Building management plaques, metal building owner signs and leasing agent markers are an excellent way to both to secure property and provide a stylish statement piece recognizing building ownership.  Our studio specializes in the creation of these custom building plaques, translating your company’s logo and business information into an eye-catching work of cast metal art.  Our studio also offers discounts on quantity plaque orders, understanding that our property management, building owner, landlord and leasing agent clients often work with multiple properties. 

Building management plaques have a great amount of flexibility in regards to their design.  Material, size, border style and finishing techniques can be tailored to the brand and personality of each company and property location.  For example, bronze and brass plaques are typically associated with a more traditional styled building, whereas a stainless steel or aluminum plaque is visually more contemporary and match modern construction.

We also can offer a variety of border styles and finishing techniques, shown on our plaque options page, that can set your plaque apart from the rest. 

Random Orbital, Satin and Polished finishes

Finally, Masterwork Plaques offers secure installation techniques that both seamlessly integrate into a plaque's design and protect against any risk of theft. For more information on building management plaques, contact us at masterworkplaques@gmail.com. 

What is the difference between an etched stainless steel and aluminum plaque? 

Etched Stainless Steel plaque with Polished "Mirror" finish & Medium Grey Infill

One common question we are asked by our clients is the difference between two visually similar metals: stainless steel and aluminum.  Both are silver in color, yet they are quite different when it comes to their other characteristics, specifically regarding their density and weight.

etched stainless steel

Dense and Durable | Corrosion resistant | Non-porous surface

Stainless Steel is an excellent choice for a plaque exposed to a significant amount of wear and tear and varying weather conditions.  The benefit of stainless steel is its exceptional durability and its corrosive-resistant surface.  Stainless steel is less likely to dent or warp over time.  It is also resistant to discoloration, because of its non-porous surface. 

CAST ALUMINUM

Softer metal | Light weight | Cost-effective

Cast aluminum plaques have unique benefits of their own.  Although aluminum is a much softer metal, it is significantly lighter in weight than stainless steel.  It is a great choice for interior plaques and can be mounted to just about any type of wall, stone or platform, as can stainless steel. At our studio, aluminum is a great alternative to stainless if you are looking to create a large custom plaque on a small budget.  Aluminum is not recommended for plaques that are inset into the ground or susceptible to a significant amount of wear and tear.  Aluminum is a soft metal and can bend and warp if it is dropped or damaged. 

metal finishes

Both metals are silver in color, which can give plaques a contemporary look—a pleasant alternative to the traditional cast bronze plaque.  Both aluminum and stainless steel plaques can be finished in three different fashions: Random Orbital, Satin and Polished finishes. 

On Stainless Steel (from left to right): Random Orbital, Satin and Polished finish

The random orbital finish is a great choice for a plaque that is installed in an area susceptible to scratching, bumping, etc.  Random orbital subtly disguises these scratches, as the sander used in our studio to produce this finish creates hundreds of small textural strokes on the surface of the plaque in every direction.  The finish gives the plaque a buffed look and creates a disguise for any accidental scratch or dent, which could otherwise ruin the look of a perfectly smooth plaque.  Alternatively, the satin, or “brushed”, finish can be added to the plaque, which is created by a different type of sander in our studio.  This is our most popular finish choice. A satin finish is created by adding a horizontal stroke to the plaque, giving it a smooth brushed surface.  It is more susceptible to scratches, but mounted in the right place, it has a very crisp and refined look.  The final option is a polished finish, which is exceptionally unique.  The metal surface is polished until it is reflective, which is why it is also referred to as a mirror finish. This is a great finish if you want to draw attention to the plaque from a distance.  It is often used on lobby plaques and general signage, in both interior and exterior settings.

For more questions on the difference between these metals and their finishes, check out our plaque options or reach out to us at masterworkplaques@gmail.com.